Sraith Q13 deil snáithithe píopa, réimse ola & deil fearsaidí log
Gnéithe
* Ceadaíonn tolladh fearsaid mhór agus chuck dúbailte píopaí trastomhais mhóra a chlampáil agus a phróiseáil.
* Glacann leaba meaisín lárnach réitigh iarainn ard-neart chun ard-rigidity agus cruinneas a bhaint amach.
*Tá bealaí treoracha múchta minicíochta ultrasonaic deacair go leor le haghaidh dea-chaitheamh-friotaíocht.
* Feistithe le gléas barra treorach barrchaolaithe, cuireann sé seo ar chumas an mheaisín snáitheanna barrchaolaithe a phróiseáil.
RÉAMHRÁ DEAL
Sraith Q13 deil snáithithe píopa a úsáidtear go príomha le haghaidh casadh na snáitheanna inmheánacha agus seachtracha, lena n-áirítear snáithe méadrach agus orlach, chomh maith le go bhfuil na feidhmeanna coitianta go léir deil inneall gnáth, mar a phróiseáil an tolladh istigh, aghaidh deiridh na shafts agus dioscaí, atá feistithe le taper gléas barra treorach, is féidir leis snáithe taper a phróiseáil, úsáidtear an tsraith seo go forleathan i dtionscail lena n-áirítear saothrú peitriliam, mianadóireacht mianraí, píopaí ceimiceacha agus lorg geolaíochta, le haghaidh próiseáil agus deisiú píopa druileála, slat druileála, cúplála snáithe agus mac ar.
| sonraíocht | aonad | R1313 | Q1319C | Q1322C | Q1325C | Q1327C | |
| acmhainn | Swing thar leaba | mm | 630/800 | 630/800 | 630/800 | 800 | 800 |
| Swing thar sleamhnán tras | mm | 340/520 | 340/520 | 340/520 | 480 | 480 | |
| Fad idir ionaid | mm | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | |
| Raon snáithithe píopa | mm | 30-126 | 50-193 | 50-220 | 50-250 | 50-270 | |
| Fearsaid | Leithead bealach treorach | mm | 550 | 550 | 550 | 600 | 600 |
| uas.acmhainn ualaigh | T | 3 | 3 | 3 | 4 | 4 | |
| tolladh fearsaid | mm | 130 | 206 | 225 | 255 | 280 | |
| Céimeanna luas fearsaidí | FWD, 18 céimeanna.REV.9 gcéim | VF, 4 chéim | |||||
| Raon luais fhearsaid | rpm | 30-650 | 20-550 | 20-420 | |||
| Chuck | mm | Φ400, lámhleabhar chuck 3-jaw | Φ520/lámhleabhar 4 jaw chuck | Φ630/lámhleabhar 4 jaw chuck | |||
| tuiréad | Postáil turret/uirlis | Lámhleabhar 4ú grád | |||||
| Méid shank uirlis | mm | 30×30 | 32×32 | 32×32 | 32×32 | 32×32 | |
| Feed | X-ais taistil | mm | 320/420 | 320/420 | 320/420 | 420 | 420 |
| Taisteal ais Z | mm | 1350/2850 | 1350/2850 | 1350/2850 | 1250/2750 | 1250/2750 | |
| Grád/raon beathaithe X-ais | mm/r | 22/0.02-0.45 | 22/0.02-0.45 | 22/0.02-0.45 | 22/0.02-0.45 | 22/0.02-0.45 | |
| Grád/raon beathaithe ais Z | mm/r | 26/0.07-1.33 | 26/0.07-1.33 | 26/0.07-1.33 | 26/0.07-1.33 | 26/0.07-1.33 | |
| X ais tapa taistil | mm/nóim | 2300 | 2300 | 2300 | 2300 | 2300 | |
| Taisteal tapa ais Z | mm/nóim | 4000 | 4000 | 4000 | 4000 | 4000 | |
| Grád/raon snáithe méadrach | mm | 52/1-24 | 1-15 | 1-15 | 1-15 | 1-15 | |
| Grád/raon snáithe orlach | TPI | 40/28-2 | 14-1 | 14-1 | 14-1 | 14-1 | |
| Tailstock | Trastomhas cuileann tailstock | mm | Φ100 | Φ100 | Φ100 | Φ120 | Φ120 |
| Tailstock quill taper | / | MT5 | MT5 | MT5 | MT6 | MT6 | |
| Taistil tailstock quill | mm | 250 | 250 | 250 | 250 | 250 | |
| mótair | Mótar fearsaid Mian | KW | 11 | 11 | 11 | 15 | 15 |
| Mótar taistil tapa | KW | 0.3 | 0.3 | 0.3 | 1.1 | 1.1 | |
| Mótar caidéil chuisnithe | KW | 0. 125 | 0. 125 | 0. 125 | 0. 125 | 0. 125 | |
| Toise | Leithead x airde | mm | 1500x1500 | 1500x1550 | 1650x1550 | 1700x1600 | 1700x1600 |
| fad | mm | 3700/5200 | 3700/5200 | 3700/5200 | 4100/5600 | 4100/5600 | |
| meáchan | Meáchan Glan | T | 4.0/5.2 | 4.3/5.5 | 4.5/5.7 | 8.0/9.0 | 8.0/9.0 |
| Nóta: is féidir fad leaba meaisín a shaincheapadh de réir fíor-éileamh oibre. | |||||||
| sonraíocht | aonad | Q1327 | Q1332 | Q1338 | Q1343 | Q1350 | |
| acmhainn | Swing thar leaba | mm | 1000 | 1000 | 1000 | 1000 | 1200 |
| Swing thar sleamhnán tras | mm | 610 | 610 | 610 | 610 | 710 | |
| Fad idir ionaid | mm | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 | |
| Raon snáithithe píopa | mm | 130-270 | 190-320 | 190-320 | 270-430 | 330-510 | |
| Fearsaid | Leithead bealach treorach | mm | 755 | 755 | 755 | 755 | 765 |
| uas.acmhainn ualaigh | T | 6 | 6 | 6 | 6 | 6 | |
| tolladh fearsaid | mm | 280 | 330 | 390 | 440 | 520 | |
| Céimeanna luas fearsaidí | FWD, 12 chéim. | FWD, 9 gcéim | FWD, 9 gcéim | FWD, 9 gcéim | FWD, 9 gcéim | ||
| Raon luais fhearsaid | rpm | 16-380 | 7.5-280 | 6-205 | 4.9-180 | 4.9-180 | |
| Chuck | mm | Φ800, lámhleabhar chuck 4-jaw | Φ780/leictreach4 chuck ghiall | Φ850/leictreach4 chuck ghiall | Φ100 / leictreach4 chuck ghiall | Φ1000 / leictreach4 chuck ghiall | |
| tuiréad | Postáil turret/uirlis | Lámhleabhar 4post | |||||
| Méid shank uirlis | mm | 45×45 | 45×45 | 45×45 | 45×45 | 45×45 | |
| Feed | X-ais taistil | mm | 520 | 520 | 520 | 520 | 520 |
| Taisteal ais Z | mm | 1350/2850 | 1350/2850 | 1350/2850 | 1350/2850 | 1350/2850 | |
| Grád/raon beathaithe X-ais | mm/r | 40/0.05-1.5 | 32/0.05-0.75 | 32/0.05-0.75 | 32/0.05-0.75 | 32/0.05-0.75 | |
| Grád/raon beathaithe ais Z | mm/r | 40/0.1-3 | 32/0.1-1.5 | 32/0.1-1.5 | 32/0.1-1.5 | 32/0.1-1.5 | |
| X ais tapa taistil | mm/nóim | 1870 | 1870 | 1870 | 1870 | 1870 | |
| Taisteal tapa ais Z | mm/nóim | 3740 | 3740 | 3740 | 3740 | 3740 | |
| Grád/raon snáithe méadrach | mm | 30/1-30 | 23/1-15 | 23/1-15 | 23/1-15 | 23/1-15 | |
| Grád/raon snáithe orlach | TPI | 27/28-1 | 22/28-2 | 22/28-2 | 22/28-2 | 22/28-2 | |
| Tailstock | Trastomhas cuileann tailstock | mm | Φ160 | Φ160 | Φ160 | Φ160 | Φ160 |
| Tailstock quill taper | / | MT6 | MT6 | MT6 | MT6 | MT6 | |
| Taistil tailstock quill | mm | 300 | 300 | 300 | 300 | 300 | |
| mótair | Mótar fearsaid Mian | KW | 22 | 22 | 22 | 22 | 22 |
| Mótar taistil tapa | KW | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | |
| Mótar caidéil chuisnithe | KW | 0. 125 | 0. 125 | 0. 125 | 0. 125 | 0. 125 | |
| Toise | Leithead x airde | mm | 2100x1600 | 2100x1650 | 2100x1700 | 2100x1700 | 2100x1700 |
| fad | mm | 4800/6300 | 4900/6400 | 4900/6400 | 5000/6500 | 4900/6400 | |
| meáchan | Meáchan Glan | T | 10.0/11.5 | 11.5/13 | 12.8/14.3 | 13.0/14.5 | 15.0/16.5 |
| Nóta: is féidir fad leaba meaisín a shaincheapadh de réir fíor-éileamh oibre. | |||||||
